Total Time Needed: 1 Hour
There's nothing tame about these fun and funky jungle-print wristbands.
Materials
- Cardboard tubes
- Stapler
- Black elastic
- Tacky glue
- Animal-print felt
- Ribbon
- Card stock
Instructions
Cut cardboard tubes into 2-inch lengths. Snip each so that it opens into a cuff shape.
Using a stapler, attach the ends of a 3 1/2-inch piece of 1/4-inch-wide black elastic as shown; make sure the staple points are facing outward.
Apply tacky glue to the outside of the cuff and cover the cuff and the elastic ends with a 2- by 6-inch strip of
animal-print felt.
Let the glue dry, then trim the felt as needed.
Use a ribbon to tie on a note cut from card stock.
Crafts
